To purchase bulk quantities, Please contact our Sales Department (+1-416-494-8999) or email shop@sayal.com
NOTE:
When you proceed to CHECKOUT, you will have an option for Curb-Side Pickup Click button and select location.
All Items in your cart must be available at your desired store location for Sayal to offer Curb-Side Pickup for that location.
The TCT355 Cable Tester is a convenient instrument for testing different
shielded/unshielded wiring schemed communication cable with RJ11
and RJ45 connectors and coax cable. This tester can be used for testing
cables before and/or after they are installed. Testing status is indicated by
multiple LEDs. Soft vinyl case provides storage for the tester remote and terminator.
CATEGORY OF CABLE
• Shielded/unshielded communication cable with RJ11 and RJ45
connectors.
• Ethernet 10 BaseT Token Ring EIA/TIA568A/B AT&T 258A and
USOC.
• 50 or 75Ω coaxial cable with BNC connectors.
• 50 or 75Ω coaxial cable with F connectors. Must use BNC to F
adapters (not supplied)
Maximum testing length for all cable types is 1 000 feet
MULTIPLE FUNCTIONS
• Testing cables before or after their installation.
• Mapping Function (to test individual wire pairs or coaxial cables).
• Cable identification (straight or crosspinning).
• Pair identification (straight or crosspinning).
• Open/short wiring test.
• Shield opens
• Automatic two speeds
OPERATION INSTRUCTIONS
Warning:
1. Caution: Do not connect the cable tester to live circuits as it may be
damaged by over voltage.
2. Turn on the TCT355. If the power light ( O ) does not light please
replace the 9V battery with a new one.
3. When testing communication cable with RJ11 connectors use only
the RJ11 jacks on the tester and remote.
How to Use the TCT355:
1. Turn on the power switch the power light will flash (“S” for low speed
test).
2. To test communication cable connect an end of the cable to the tester
and the other end of the cable to the remote.
3. The LED’s will light in sequence 1 G on the tester. Check that the
correct corresponding LED lights on the remote unit per your wiring
configuration. A short is indicated by no LED’s lighting on the remote.
An open wire/shield by no LED’s lighting on the tester and remote.
4. To test a coaxial cable connect one end of the coaxial cable to the
connector on the tester and connect a terminator to the other end. If
the cable is good the TCT355 indicator light “B” will be lit green and
the terminator LED will be lit. If the light does not turn on the cable
has an open connection or short.